U
SING
THE
C
ONTROL
P
ANEL

2.16

PCL Menu
This menu sets the PCL emulation configuration. You can set the
font type, symbol type, lines per page, and point size.
(*: the default setting)
Item Explanation
Typeface
You can select the standard font to be
used in PCL emulation.
• PCL1~PCL7’s interval between letters is
fixed, and PCL8~PCL44’s interval is
proportional to the font type and point
size. You can adjust the font size of
PCL1~PCL7 using the
Pitch
item, and
PCL8~PCL44 can do using
Point Size
item (see page 2.17).
• PCL45~PCL54’s interval and point size are
fixed.
Symbol This item selects the symbol to be used in
PCL emulation. The symbol is the group of
numbers, marks, and special signs being
used when printing letters.
Lines This item allows you to set vertical
spacing from 5 to 128 lines for the default
paper size. The default value of Lines may
differ according to the paper size and
printing orientation.
Pitch When you select from PCL1 to PCL7 from
the Typeface menu, you can determine
the font size by setting the number of
characters that will print in one horizontal
inch of type. The default value, 10, is the
recommended size.
Values: PCL1 ~ PCL54
Values: ROMAN8 ~ PCCYRIL PC8*
Values: 005 ~ 128 060* (Letter), 064* (A4)
Values: 0.44 ~ 99.99 (0.01 unit) 10*