Samsung DV520AEP/XAA safety instructions _5, WARNING:, 9.Do not tamper with controls, 12.Clean the lint screen before or after each load
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using your WARNING appliance, follow basic precautions, including the following:
1.Read all instructions before using this appliance.
2.Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline,
3.Do not use the dryer to dry clothes which have traces of any flammable substance, such as vegetable oil, cooking oil, machine oil, flammable chemicals, thinner, etc., or anything containing wax or chemicals, such as mops and cleaning cloths. Flammable substances may cause the fabric to catch fire by itself.
4.Do not store or use gasoline or other flammable vapors and liquids near this or any other appliance.
5.Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children.
6.Before the appliance is removed from service or discarded, remove the door to the drying compartment.
7.Do not reach into the appliance if the drum is moving.
8.Do not install or store this appliance where it will be exposed to the weather.
9.Do not tamper with controls.
10.Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the
11.Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.
12.Clean the lint screen before or after each load.
13.Do not use heat to dry articles containing foam rubber or similarly textured
14.Keep area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust, and dirt.
15.The interior of the appliance and exhaust duct should be cleaned periodically by qualified service personnel.
16.Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.
SAVE THESE INSTRUCTIONS