8.Move the position of the screw at the back of the door-hinge.
9. Fasten the screw in the bottom hole.
10.Remove the two screws holding the front-frame at the left.
11.Remove the two screws holding the holder-lever at the left.
12.Now, move to the right side of the product and fasten the two screws holding the
13. Align the door with the fixing holes.
14. Fasten the two screws holding the door-hinge.
Inside the drum
You can restore the direction the door opens by following the procedures above, if necessary.
DRYER YOUR INSTALLING
English - 19