Samsung DVD-HR755/EUR, DVD-HR755/AUS, DVD-HR753/XEB manual Using the ShowView Feature, Date, Jan

Recording

HDD & DVD RECORDER									Timer Record
	HDD
			Library		ShowView
	Timer Record				Scheduled List
					ShowView Extended				: Off
	Disc Manager				Recorded List
				Setup
mMOVE				sSELECT			rRETURN			eEXIT
HDD & DVD RECORDER										ShowView
	HDD
			Library
	Timer Record				Enter ShowView Code number. [0-9]
	Disc Manager
				Setup	(Press [OK] button: Make Code.)
0~9 NUMBER				sSELECT			rRETURN			eEXIT
	HDD								Scheduled List
								Current Time 10:54
	No. To			Source	Date	Start	End Mode VPS/PDC
	No.	01 No		Title	A	dd a li	st
	To		S	ource	Date	Start	End		Mode	VPS/PDC

HDD	– –	JAN 01	10 : 54	12 :54	SP	On
Recordable Time HDD 108:14 SP					Title	s Save

Recordable Time HDD 108:14 SP

Recorded List

<MOVE sSELECT rRETURN eEXIT

Using the ShowView Feature

SXCVKL

HR755/HR756 Only

Before presetting your HDD & DVD RECORDER.

•Switch on both the television and your HDD & DVD RECORDER.

•Check that the date and time are correct. Up to twelve programmes can be preset

1.With the unit in Stop mode, press the MENU button.

2.Press the ▲▼ buttons to select Timer Record, then press the OK or ► button.

3.Press the ▲▼ buttons to select ShowView, then press the OK or ► button.

•A message is displayed to allow you to enter the ShowView code.

4.Press the number buttons to enter the code of the programme that you want to record in your television magazine.

•If you want to correct the ShowView code that you are entering:

-Press the ◄ button until the digit to be corrected is cleared.

-Enter the correct digit.

5.Press the OK button.

•The information concerning the programme is displayed.

•When using the ShowView function for the first time with stored stations, the programme number flashes. This one time, you must enter the PR number manually by pressing the ▲▼ buttons.

6.Press the RED(A) button if you do not want to use the default title name.

The rename screen is displayed.

Follow steps 4 and 5 of “Renaming (Labeling) a Title” on page 77.

7.If the programme and times are correct, press the OK button.

8.Turn the power off by pressing the STANDBY/ON button to activate the timer recording setting.

•Refer to pages 73, 75 if you want to

-Check whether the timer Recording has set correctly or not.

-Cancel a preset recording.

M The numbers next to each TV programme listing in the magazines or newspapers are ShowView code numbers, which allow you to programme your HDD & DVD RECORDER. instantly with the remote control. Enter the ShowView code for the programme you wish to record.

ShowView is a trademark of Gemstar Development Corporation. The ShowView system is manufactured under licence from Gemstar Development Corporation.

English - 74