Samsung DVD-HR757/XEG manual Copying from a Camcorder, Press the Input SEL. button to select DV

Recording

6 Record Mode SP(35:12) >

DV

The DV device is connected

<MOVE rRETURN

Copying from a Camcorder

SXCVKL

You may control the Camcorder using the IEEE1394 (DV) interface.

1.Connect the DV output jack of your camcorder to the DV input jack on the front of your HDD & DVD RECORDER using a DV cable.

2.Press the HDD or DVD button.

If you select DVD, press the OPEN/CLOSE button and place a recordable disc on the disc tray. Press the OPEN/CLOSE button to close the disc tray. Wait until LOAD disappears from the front panel display.

3.Press the REC MODE button repeatedly to select the recording speed(quality).

➞SP ➞ LP ➞ EP ➞ XP

4.Press the INPUT SEL. button to select DV.

If the input is set to DV, a playback/record menu that enables camcorder control appears on the top of the screen.

5.Select the Play (►) icon on the upper part of the screen to playback the camcorder and find the starting position to copy.

6.To start recording, use the ◄► buttons to select Record ( ● ) icon in the top side of the screen, then press the OK button.

You can press the REC button of the remote control to start recording.

To stop recording

Press the STOP () button to stop or finish a recording in progress.

•When using DVD-RAM/±RW/±R discs, the message “Updating the information of disc. Please wait for a moment” is displayed.

M To display playback related icons on the screen, press any direction button on the remote control.

English - 66