The disc revolves, but no image or bad quality images is displayed.
Checkpoint 1 | Be sure that the Video Setting is |
| properly set. (See pages 35~38) |
Checkpoint 2 | Check whether there is damage to or any |
| foreign material on your disc. |
Checkpoint 3 | Some low quality discs may not play properly. |
Checkpoint 4 | If scenes change from dark to bright |
| suddenly, the screen may shake |
| vertically temporarily, but this is not a fault. |
No sound.
Checkpoint 1 | Are you watching a programme in slow or skip |
| mode? |
| If you are playing a programme at a speed |
| other than normal speed, sound will not be |
| heard. (Except for forward search (X 2) in |
| disc.) |
Checkpoint 2 | Check the connections and settings. (See |
| pages 21~22, 33~34) |
Checkpoint 3 | Check whether the disc is damaged. Clean |
| the disc, if necessary. |
Checkpoint 4 | Check whether the disc is inserted |
| correctly with the label facing up. |
No audio output. | |
Checkpoint 1 | Check whether you have selected the correct |
| digital output options in the Audio Output |
Options menu. (See pages 33~34)
Timer lamp flickers.
Checkpoint 1 | Check there is enough space in the disc or |
| HDD for recording. |
Checkpoint 2 | Check whether the current disc is recordable |
| or not. |
| Make sure to check before the start time of |
| recording. |
Timer recording does not work properly. | |
Checkpoint 1 | |
| settings again. |
Checkpoint 2 | Recording will be cancelled if the power is |
| interrupted due to a power failure or another |
| similar reason while recording. |
USB
Cannot copy MP3 or JPEG or DivX files
Checkpoint 1 | Check the connections and settings. |
| (See page 25) |
Checkpoint 2 | Check the USB connection.Disconnect and |
| try to connect again. |
Checkpoint 3 | Refer to “Compatible USB devices at host |
| port”on page 7. |
No HDMI output.
Checkpoint 1 | Check whether the mode is stop mode or not. |
| You can switch HDMI mode in stop mode. |
Checkpoint 2 | Check the Video output is HDMI enabled. |
Checkpoint 3 | Check the connection between the TV and |
| the HDMI jack of the HDD & DVD |
| RECORDER. |
Checkpoint 4 | See if your TV supports HDMI. |
Abnormal HDMI output screen. | |
Checkpoint 1 | If snow noise appears on the screen, it means |
| that TV does not support HDCP (High- |
| bandwidth Digital Content Protection). |
HDMI output Jitter. | |
Checkpoint 1 | Check your TV system setup correctly. |
Checkpoint 2 | Please refer to the user’s manual of your TV. |
eferenceR
English - 101