Samsung DVD-V6400, DVD-V6000, DVD-V5450 user manual Connecting the Audio Output Cable

Connecting DVD-VCR to the TV using the RF Cable

To receive television programmes a signal must be received from one of the following sources:

•An outdoor aerial

•An indoor aerial

•A cable television network

•A satellite receiver

Make sure that both the television and the DVD-VCR are switched off before

Note

connecting the cables.

Remove the aerial or network input cable from
1 the television.
Connect this cable to the 75Ω coaxial jack
2 marked	on the rear of your DVD-VCR.

3 Plug the RF Cable supplied into TV the jack on your DVD-VCR.

4 Plug the other end of the RF Cable into the connector previously used for the aerial on the television.

Aerial

Aerial cable

TV2

3

4

RF cable

Connecting DVD-VCR to the TV using the SCART Cable

You can connect your DVD-VCR to the television using the SCART cable if the appropriate input is available on the television. You thus:

•Obtain better quality sound and pictures

•Simplify the setting up procedure of your DVD-VCR

Regardless of the type of connection chosen, you must always connect the RF Cable

	Note	supplied. Otherwise, no picture will be visible on
		the screen when the DVD-VCR is switched off.
		Make sure that both the television and the
		DVD-VCR are switched off before connecting
		the cables.
1 Connect the Aerial Cable.
2		Connect one end of the SCART cable to the AV1
		(EURO AV) jack on the rear of the DVD-VCR.

3 Plug the other end into the appropriate connector on the television.

❚Connecting the Audio Output Cable

You can connect your DVD-VCR to a Hi-Fi system.

Example:You wish to take advantage of the quality of your Hi-Fi stereo system when watching a disc play.

4 Plug the audio output cable into the audio connectors on the rear of your DVD-VCR.

5 Plug the other end of the audio cable into the appropriate input connectors on your Hi-Fi stereo system.

4

Aerial

1

2

5

TV

3

RF cable

Connections

English - 11