Samsung DVD-V5450, DVD-V6000, DVD-V6400 user manual Plug & Auto Setup

Plug & Auto Setup

Your DVD-VCR will automatically set itself up when it is plugged into the mains for the first time.

TV stations will be stored in memory. The process takes a few minutes. Your DVD-VCR will then be ready for use.

émarrerD
	1	Connect the RF Cable as indicated on page 11.
		(Connecting Your DVD-VCR to the TV using the
		RF Cable)
	2	Plug the DVD-VCR into the mains.
		• “AUTO” in the front panel display flickers.

3	The Language Set menu is displayed.
	Press the … or † button, move the selection
	bar to select the desired language then press
	OK button.
				Language Set
		√	English
			Français
			Deutsch
			Español
			Italiano
			Nederlands
			OK	RETURN MENU

4 Start the auto setup.

Auto Setup will be started.

Check antenna and TV cable connection.

RETURN MENU

5 Start the auto scanning.

The number of stations automatically stored by the DVD-VCR depends on the number of stations that it has found.

Auto Setup

Please Wait

10%

√√

RETURN MENU

6 The current time and date are displayed automatically.

			Clock Set
SETUP
DVD	Time	Date	Year
	12 : 00	01 / JAN	/ 2005 SAT
VCR	Auto Clock		: On
PROG
FUNC
	OK	RETURN	MENU

Check the date and time. if it is :

•Incorrect, refer to “Setting the date and time”. (See page 18)

•Correct, press the RETURN button twice to exit the menu.

Now, you only have to switch the DVD-VCR

Note on and it is ready for use.

Function for “Plug & Auto Set Up” is fixed already. So if you want to change this fixed one, you can change. (refer to “Presetting the Stations manually” page 20)

16 - English