Samsung DVD-V6400, DVD-V6000, DVD-V5450 user manual Settings

Settings

•Tuning Your Television for the DVD-VCR . .	17
•Setting the Date and Time	18
•Setting the Menu Language	19
•Presetting the Stations Automatically	19
•Presetting the Stations Manually	20
•Clearing a Preset Station	21
•Changing the Preset Station Table	23
•Setting the VCR Output Channel	23

Tuning Your Television for the DVD-VCR

You must tune your television for the DVD-VCR only if you are using the RF cable.

To view pictures from your DVD-VCR when a Scart cable is used, the television must be set to the audio/video mode (AV).

1	Switch on the television.
2	Switch on the DVD-VCR by pressing the
	/I STANDBY/ON on the front of the DVD-VCR
	or STANDBY/ON on the remote control.
	Select a programme position on the television
3 to be reserved for use with your DVD-VCR.
4	Insert the video cassette in the DVD-VCR.
	Check that the DVD-VCR starts reading the
	cassette; if not, press the √II button.

5 Start a scan on your television or set the television to UHF channel 60.

6 Fine tune the television until the pictures and sound are obtained clearly.

7 When the picture and sound are perfectly clear, store this channel at the desired programme position on the television.

That programme is now reserved for use with your DVD-VCR.

Settings

English - 17