Samsung DVD-V6400 Select an input Press the œ or √ button to select PR, Changing any other value

VCR Functions

6	If the programme and times are correct, press the
	OK button.

7 Press the STANDBY/ON button to activate the timer.

•The numbers next to each TV programme listing are VideoPlus code numbers, which allow you to programme your DVD-VCR instantly with the remote control. Tap in the VideoPlus code for the programme you wish to record.

•Refer to page 36~37 if you wish to:

-Check that your DVD-VCR has been programmed correctly

-Cancel a preset recording

VideoPlus is a trademark of Gemstar Development Corporation. The VideoPlus system is manufactured under licence from Gemstar Development Corporation.

Modifying VideoPlus

Programming (DVD-V6000/

DVD-V6400/DVD-V6500)

If you wish to correct the programme displayed or modify certain elements, such as the recording speed, you can do so before you press the RETURN button.

If you wish to...	Then...
Select an input	1 Press the œ or √ button to select PR.
source (AV1, AV2	2 Press the INPUT SEL. button to select AV1,
(DVD-V6400/		AV2(DVD-V6400/DVD-V6500), or AUX(DVD-
DVD-V6500) or		V6000/DVD-V6500).
AUX(DVD-V6000/		• The input source must be selected before
DVD-V6500) other		changing any other value.
than the tuner
Record a	1	Press the œ or √ button to select Day.
programme every	2	Press the … or † button to select DLY
day (Monday to		(Daily).
Sunday) at the
same time
Record a	1	Press the œ or √ button to select Day.
programme every	2 Press the … or † button to select the
week on the same		required day.
day and at the		DLY	: Daily
same time		W-SU	: Weekly Sunday
		W-MO : Weekly Monday
		W-TU : Weekly Tuesday
		W-WE : Weekly Wednesday
		W-TH : Weekly Thursday
		W-FR : Weekly Friday
		W-SA	: Weekly Saturday
		SA 01	: Saturday 01
Extend the	1 Press the œ or √ button to select the
recording time		recording stop time.
	2 Press the … or † button to set the time.
Select the	1 Press the œ or √ button to select Speed.
recording speed	2 Press the … or † button to select the
		required speed.
		Auto ➝ SP (Standard Play) ➝ LP (Long Play)
Select the	1 Press the œ or √ button to select V/P
VPS/PDC		(VPS/PDC).
recording	2 Press the … or † button to select On.
		• Do not select V/P unless you are sure the
		programme you wish to record is broadcast
		with VPS/PDC. If you do set V/P to On, then
		you must set up the start-time exactly
		according to the published TV schedule.
		Otherwise the timer recording won’t take
		place.

32 - English