28 -
English
VCR Functions
Video cassettes have a safety tab to prevent accidental
erasure. When this tab has been removed, you cannot
record on the tape.
1If you wish to protect a cassette, break off the tab
using a small screwdriver.
2To re-record over a protected cassette (safety tab
broken), cover the hole with adhesive tape.
Repeat Play
You can set repeat play to repeat the tape continuously
from beginning to end.
1Press the MENU button, then press the …or †
button to select VCR.
2Press the OK or √button.
The Tape Selectis highlighted.
3Press the …or †button to select Repeat Play.
Press the OK or √button to select On or Off.
• On : Repeat play.
• Off : Do not wish to repeat play.
Selecting theRecording Speed
You can record a cassette at two different speeds:
• SP (Standard Play)
• LP (Long Play)
In Long Play modes:
• Each cassette lasts twice as long
• The recording is of a slightly lower quality
1Press the SPEED button to select SP or LP.
• The selected record speed will appear on the
front panel display.
Type Recording Time (in SP)
E180 180 mins. or 3 hours
E240 240 mins. or 4 hours
E260 260 mins. or 4 hours and 20 mins.
E300 300 mins. or 5 hours
SETUP
DVD
VCR
PROG
FUNC
VCR Setup
Tape Select : E180
√√
Repeat Play : Off
√√
OK RETURN MENU
SETUP
DVD
VCR
PROG
FUNC
VCR Setup
Tape Select : E180
√√
Repeat Play : Off
√√
OK RETURN MENU
SETUP
DVD
VCR
PROG
FUNC
VCR Setup
Tape Select : E180
√√
Repeat Play : Off
√√
OK RETURN MENU
Protecting a RecordedCassette