Samsung DVD-V5450 Using the VideoPlus Feature DVD-V6000/DVD-V6400/ DVD-V6500, VideoPlus code

Using the VideoPlus Feature (DVD-V6000/DVD-V6400/ DVD-V6500)

Before presetting your DVD-VCR:

•Switch on both the television and your DVD-VCR

•Check that the date and time are correct

•Insert the cassette on which the programme is to be recorded (safety tab intact)

Up to six programmes can be preset.

1 Press the MENU button, then press the … or † button to select PROG, then press the OK or √ button.

The Timer Method menu is displayed.

		Timer Method
SETUP	Standard	√
DVD	VideoPlus	√

VCR

PROG

FUNC

OK RETURN MENU

2 Press the … or † button to select VideoPlus, then press the OK or √ button.

		Timer Method
SETUP	Standard	√
DVD	VideoPlus	√

VCR

PROG

FUNC

OK RETURN MENU

•It can be displayed simply by pressing the TIMER button on the remote control.

The Clock Settings menu will appear if the Note time was not set on the first run.

3	A message is displayed to allow you to enter the
	VideoPlus code.

							VideoPlus
SETUP
DVD	Code	- - -	-	-	- -	-	-
VCR		Code					: 0 –9
		Correct					: œ
PROG
FUNC
	OK		RETURN				MENU

•If all six programmes have been set, the message Timer is full is displayed. Refer to page 36 if you wish to cancel a preset recording.

4 Press the number buttons to enter the code opposite the programme that you wish to record in your television magazine.

•If you wish to correct the VideoPlus code that you are entering:

-Press the œ button until the number to be corrected is cleared.

-Enter the correct number.

5	Press the OK button.
	The information concerning the programme is
	displayed.
		PR	Day	Start	Stop	Speed	V/P
		01	SA 01	13 : 25	19 : 57	SP	Off

: :

: :

: :

: :

: :

OK RETURN MENU

•When using the VideoPlus function for the first time with stored stations, the programme number flashes. This one time, you must enter the station number manually by pressing the

…or † button.

For more details, please refer to page 32.

VCR Functions

English - 31