Samsung DVD-V85K instruction manual Deck Control Buttons Basic VHS Playback, Basic DVD Playback

00090A DVD-V85K/XTC-Eng2 9/17/02 11:31 AM Page 12

Deck Control Buttons

Basic VHS Playback

1

2	4
3

The DVD-VCR uses one set of controls to operate both decks. The following buttons are helpful in successfully controlling each deck.

1POWER Button

Press the POWERbutton on the remote control or front panel to turn on the DVD-VCR.

2DVD Button

Press the DVD button on the remote control or front panel when you want to control the DVD deck.

•The DVD indicator will light on the Front Panel Display to show that the DVD deck is selected.

3VCR Button

Press the VCR button on the remote control or front panel when you want to control the VCR deck.

•The VCR indicator will light on the Front Panel Display to show that the VHS deck is selected.

4INPUT SEL. Button

Press the INPUT SEL.button repeatedly to cycle through all of your input sources, including the Tuner (Ch##), Line 1 (rear AV input).

•It is only available when VCR deck is selected.

To play a videotape, simply insert it in the VHS deck and press the Play button. Tapes without Record Safety Tabs can be set to play automatically when inserted; see page 43.

1Insert VHS Tape

Insert a standard VHS videotape into the VHS Deck.

• Power will turn on automatically when you insert a videotape.

2Play Tape

Press the ll (Play/Pause) button on the remote control or front panel. If the tape is missing the Record Safety Tab and Auto Play is turned on, the tape will begin to play automatically, see page 43.

3Stop Playback

Press the ■ (Stop) button on the remote control or front panel.

4 Eject Tape 1

Press the OPEN/CLOSE button on the remote control or the

EJECT button on the front panel.

5Additional VCR Options

•For special VCR Playback features, see pages 42~43.

•For VCR Recording features, see pages 45~47.

•For Timer Recording features, see page 48.

Basic DVD Playback

3

2

1 1

4

Follow these instructions to playback a DVD.

1Open Disc Drawer

Press the OPEN/CLOSE button on the remote control or front panel to automatically power on the DVD-VCR and open the disc drawer.

2Insert Disc

Place the disc in the drawer with the label side of the disc facing up. If the disc has two sides, orient the disc with the desired label facing up.

3Close Disc Drawer

Press the OPEN/CLOSE button on the remote control or front panel to close the disc drawer.

4Play the DVD

Press the ll (Play/Pause) button on the remote control or front panel.

•Many discs will begin playback automatically when the disc drawer closes.

•If the DVD has a disc menu, or more than one title, the disc menu may appear.

5Additional DVD Options

•For advanced DVD Setup options, see pages 22~29.

•For special DVD Playback features, see pages 31~41.

4

12

13