Samsung DVD-VR320 instruction manual Playing a Disc

This DVD Recorder & VCR can only operate

Note with discs that are compatible with DVD-RAM Standard Version 2.0.

Playback and/or recording may not work for some types of discs, or when specific opera- tions, such as angle change and aspect ratio adjustment, are being performed. Information about the discs is written in detail on the box. Please refer to this if necessary.

Do not allow the disc to become dirty or scratched, fingerprints, dirt, dust, scratches or deposits of cigarette smoke on the recording surface may make it impossible to use the disc for recording.

DVD-RAM/-RW/-R discs may not be able to play on some DVD players, depending on the player, disc and the condition of the recording. Discs with PAL programs recorded on them cannot be recorded using this product.

Playing a Disc

Playback

1	Press the OPEN/CLOSE button.
	Place a disc gently into the tray with the disc’s
2 label facing up.
3	Press OPEN/CLOSE button to close the disc tray.
	• Your DVD Recorder & VCR closes the disc
	tray and plays the disc automatically.
	• The recorder does not play discs automatically
	after the initial power on.
	• When the recorder is powered on and a disc is
	in the tray, the unit will be activated and wait in
	stop status.
	• Press the PLAY button to start playback.
	• If you insert a MP3 Disc, your DVD Recorder &
	VCR will display the file list on the screen and
	start playing.
	• If you insert a JPEG Disc, folders and a file list
	are displayed.
	• If you want the unit to play automatically when it
	is powered on with a disc in the unit, power on
	with the PLAY button.
4	Press the STOP button to stop playback.

When you stop disc play, the DVD Recorder &

Note VCR remembers where you stopped. When you press PLAY button again, it will pick up where

36 - English

CAUTION

you left off. (unless the disc is removed or the DVD Recorder & VCR is unplugged, or if you press the STOP button twice.) This function is only applicable to DVD-VIDEO, DVD-RAM, DVD-RW, DVD-R or Audio CDs (CD-DA).

Do not move your DVD Recorder & VCR while playing, as this may cause damage to the disc. Make sure to press the OPEN/CLOSE button to open or close the disc tray.

Do not push the disc tray while it is being opened or closed, as this may cause a product malfunction.

Do not place foreign materials on or in the disc tray.

Some functions may perform differently or be disabled depending on the disc type. If this occurs, refer to the instructions written on the disc case.

Be especially careful that children's fingers are not caught between the disc tray and the tray chassis when it closes.

After turning power on, it will take a few seconds until the DVD Recorder & VCR oper- ates.