Samsung DVD-VR320 instruction manual Special Recording, Features

Recording

	Special Recording		When DVD Recorder & VCR is connected to
		Note	your TV using S-Video or component video
	Features		cable, the playback screen on the video tape
			will not display during DVD recording.
			You cannot record different channels at the
			same time.
			The DVD and VCR cannot start recording at
			the exact same time. You must set one mode
While a recording is in progress, you can watch a differ-			to start recording, then the other.
ent channel, watch a different media, or add recording
time in 30-minute increments.
	Watch a Different Channel
1 When you watching through the Antenna input
	during recording, press the TV/VCR button on the
	remote control. Change the channel you want to
	watch.

-When you watching through AV input during recording, change the input of your TV from AV to Antenna.

Change the channel you want to watch.

2 Watch a different media during record- ing

You can watch a DVD during VCR recording or watch a Video tape during DVD recording.

•During VCR recording, insert a DVD in the DVD deck. The output will automatically change to the DVD and start playback.

•During DVD recording, insert a Video tape in the VCR deck. The output will automatically change to the VCR and start playback. (Only if tape is missing the safety tab)

3 Add Recording Time

Refer to the One-Touch Recording (OTR). (See page 55)

4 Recording DVD and VCR at the same time

You can record DVD and VCR at the same time, but both modes must be set up to record separately.

•Press the DVD/VCR button to set the unit to DVD or VCR mode.

•Choose AV input mode (CH, AV1, AV2 or DV). for DVD or VCR.

•Choose REC mode for DVD or VCR.

•Press REC button for DVD or VCR.

60 - English