English - 29
System Setup
Setting Up theDisplay(Video) OptionsThis function allows you to setup the TV screen
settings.
1
With the unit in Stop mode/No Disc mode, press
the MENU button.
2
Press the …† buttons to select Setup, then press
the ENTER or √button.
3
Press the …† buttons to select Video, then press
the ENTER or √button.
Video option menu will be displayed.
4
Press the …† buttons to select the desired video
option, then press the ENTER or √button.
5
Press the …† buttons to select the desired item,
then press the ENTER or √button.
Press the RETURN or œbutton to return to the
previous menu. Press the MENU button to exit
the menu
.
Note
TV Aspect
Depending on the type of television you have, you
may want to adjust the screen setting. (aspect ratio)
• 4:3 Letter Box : Select when you want to see the
total 16:9 ratio screen DVD sup-
plies, even though you have a
TV with a 4:3 ratio screen. Black
bars will appear at the top and
bottom of the screen.
• 4:3 Pan - Scan : Select this for a conventional
size TV when you want to see
the central portion of the 16:9
screen. (Extreme left and right
side of movie picture will be cut
off.)
• 16:9 Wide : You can view the full 16:9 picture on
your widescreen TV.
Input Level
Adjusts the level of the input signal.
• Darker :
If you feel the screen is too light
and you want to make the sceen
darker.
• Lighter :
If you feel the screen is too dark
and you want to make the sceen
lighter.
Black Level
Adjusts the black level of the screen.
• 0 IRE : This is the standard NTSC reference black
level for consistent brightness/
contrast across all sources.
Select this when you want darker screen.
• 7.5 IRE : This will enhance the black level for
increased brightness/contrast when
viewing DVDs.
Select this when you want lighter screen.
3D Noise Reduction
• Off : Normal
• On : Select to remove noise from the screen.
No Disc Video
MOVE SELECT RETURN EXIT
Setup
Timer Rec.
TV Aspect : 16:9 Wide √√
Input Level : Darker √√
Black Level : 7.5 IRE √√
3D Noise Reduction : Off √√
No Disc Setup
System √√
Clock Set √√
Channel Set √√
Language √√
Audio √√
Video √√
Parental Control √√
MOVE SELECT RETURN EXIT
Setup
Timer Rec.
This function depends on disc type. It may not
work for some disc types.
IRE: Short for the Institute of Radio Engineers. An
IRE unit is a relative unit of measure equal-
ing 1/140th of the peak-to peak (p-p) video
amplitude.
Note
00588A(00)-VR320-1/XAA-eng 3/3/05 7:26 PM Page 29