Samsung DVD-VR320 Method 2 Connecting to an S-video input jack, On the TV screen

Method 2 : Connecting to an S-video input jack

Connect an S-video cable(not included) between the S-VIDEO OUT jack on DVD Recorder & VCR and S-VIDEO IN jack on your TV (or AV amplifier).

•You will enjoy high quality images. S-Video separates the picture element into black and white (Y) and color

(C)signals to present clearer images than regular video input mode.

•Connect audio cables(white and red) between the AUDIO L, R OUT Jacks (AV OUT) on the DVD Recorder & VCR and AUDIO IN jacks on TV(or AV amplifier). (See pages 18 to 19)

INPUT

S-VIDEO

Method 3 : Connecting to Component video input jacks(Y,PB,PR)

Your TV must support progressive scan input to allow you to watch progressive scan component video output.

1.Connect Component video cables(not included) between the VIDEO OUT jacks (COMPONENT OUT) on DVD Recorder & VCR and COMPONENT VIDEO IN jacks on your TV (or AV amplifier).

2.Press the P.SCAN button on the front panel while the unit is in Stop mode. The message [Press “Yes” to confirm Progressive scan mode. Otherwise press “No”.] will be displayed.

Press the œ √ buttons to select Yes, and then press the ENTER button. Make sure that the disc has stopped completely before changing the mode.

COMPONENT

Connections

•You will enjoy high quality accurate color reproduction images. Component video separates the picture element into black and White(Y), blue(PB), red(PR) signals to present most clear and clean images.

■Make sure that the color coded connections

	match. That is, the Y, PB and PR component
Note
	output jacks of your DVD Recorder & VCR
	should be connected to the exact correspond-
	ing component input jacks on your TV.
	Otherwise, red or blue images will be displayed
	on the TV screen.

■Make sure that the left and right audio output jacks of your DVD Recorder & VCR are con- nected to the left and right audio input jacks of your TV, respectively.(page 18)

English - 17