Samsung DVD-VR320 Connecting the Video Cable, Video, Component video and Progressive Output Modes

Method 3 : Antenna + DVD Recorder &

VCR + Cable box +TV : Cable box with a few scrambled channels

You can record non-scrambled channels by selecting the channel on the cable box. You cannot record scrambled channels that require a cable box.

	Wall
Connections	To RF IN
	To RF OUT

Cable box

RF Cable

To ANT INPUT

Step 3: Connecting the Video Cable

There are several ways to connect your DVD Recorder

&VCR. Select one of the following video connecting methods that best suits you below.

• Method 1 : Connecting to a Video input jack

• Method 2 : Connecting to an S-video input jack

• Method 3 : Connecting to Component video input jacks (Y, PB, PR )

S-Video, Component video and Progressive Output Modes

•S-Video and Component video output are available only if your TV supports S-Video input or Component video input, respectively. If S-Video or Component video output does not work, check the TV connections and the TV input selection settings.

•Compared to standard interlaced video, progressive scan doubles the amount of video lines fed to your TV, resulting in a more stable, flicker-free, and clear image than interlaced video. The progressive scan video out- put jack is used in progressive output mode. This is only available with TVs that support progressive scan.

•Consumers should note that not all high definition tele- vision sets are fully compatible with this product and may cause artifacts to be displayed in the picture. If you experience 480 progressive scan picture prob- lems, it is recommended that you switch the connec- tion to the ‘standard definition’ output. If there are questions regarding TV set compatibility with this model, please contact our customer service center at 1-800-SAMSUNG.

Method 1 : Connecting to a video input jack

Connect a video(yellow) cable between the VIDEO OUT jack (AV OUT) on DVD Recorder & VCR and VIDEO (yellow) IN jack on the TV(or AV amplifier).

•You will enjoy regular quality images.

•Connect audio cables (white and red) between the AUDIO L, R OUT Jacks (AV OUT) on the DVD Recorder & VCR and AUDIO IN jacks on TV (or AV amplifier).

16 - English