Beep
■If you set the operation sound to ON, various sounds will be activated for camera startup, when button are pressed, and if there is a card error, so that you can be aware of the camera operation status.
●Setting Operation Sounds
1. In any mode with the exception of Voice Recording mode, |
|
|
|
|
|
|
◀ |
|
| ▶ | |||
press the MENU button. |
|
| ||||
2048 |
|
|
|
| ||
2. Press the LEFT/ RIGHT button and select the [SETUP] |
|
|
|
| ||
|
| SETUP | ||||
menu tab. |
| DATE TYPE |
| |||
3. Select the [BEEP] menu by pressing the UP/ DOWN |
| IMPRINT |
|
| OFF |
|
button and press the RIGHT button. |
| BEEP |
|
| ON |
|
| BACK:◀ |
|
| SET:OK |
| |
4. Select a desired sub menu by pressing the UP/ DOWN |
|
|
|
| ||
|
|
|
|
|
| |
button and press the OK button. |
|
|
|
|
|
|
[BEEP] sub menu : OFF/ ON |
|
|
|
|
|
|
5. Press the menu button twice and the menu will disappear. |
|
|
|
|
|
|
Frequency
■The alternating current frequency influences the image quality.
If you don't select the same [FREQUENCY] sub menu as your nation's alternating current frequency, there will be a line on a stored image. Should this be the case, change the [FREQUENCY] sub menu.
● Selecting frequency type
1. Press the MENU button. |
|
|
|
|
|
◀ |
| ▶ | |||
2. Press the LEFT/ RIGHT button and select the [SETUP] |
| ||||
2048 |
|
|
| ||
menu tab. |
|
|
| ||
| SETUP | ||||
3. Select the [FREQUENCY] menu by pressing the |
| ||||
| IMPRINT |
|
|
| |
UP/ DOWN button and press the RIGHT button. |
| BEEP |
| 50Hz |
|
4. Select a desired sub menu by pressing the UP/ DOWN |
| FREQUENCY |
| 60Hz |
|
button and press the OK button. |
| BACK:◀ |
| SET:OK |
|
|
|
|
|
|
|
-[FREQUENCY] sub menu : 50Hz, 60Hz
5.Press the menu button twice and the menu will disappear.
●60Hz : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
●50Hz : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway.
《74》
