4.0Installation
4.1Positioning the Changer
The instructions below lead through the physical installation of the
1.Attach the placement fixtures
To stabilize the Changer further, attach the placement fixtures at the corners of the unit
•Always be sure to attach the placement fixtures first
•Verify that the placement fixtures are protecting the ports and cables on the back of the unit
Please note that any damage caused to the rear ports or cables as a result of failing to install the fixtures, voids the warranty for that damage.
2. Select the installation location for the Changer
• The back of the Changer should be at least 50 centimeters (approximately 20 inches) from the wall
• The back access panel must be able to fully open in order to add or remove individual disc magazines or drives
- 10 -