Pioneer DRM-7000 P r e s s E N T - k e y t o e j e c t h y p e r, H o t s t a r t ?

DRM-7000Operating Instructions

Similarly, a command from the host computer to eject a hyper magazine while

Auto Eject is set to OFF results in the following message.

P r e s s E N T - k e y

t o e j e c t h y p e r

Use the Administrator key to Unlock the Changer and remove the hyper magazine.

5.2.3.7Hot Start

If discs are left in the drives when the power to the Changer is turned OFF then ON, the discs are automatically returned to their original slots. This operation fails to activate after a SCSI reset.

Before selecting the Hot Start function, choose the disc or discs that must remain in the drives. Activate the Hot Start command to retain frequently used discs in the drives upon powering ON the DRM-7000.

H o t s t a r t ?

Press the Enter button

H o t s t a r t i s

set to ON / OFF

Press the left arrow button

H o t s t a r t i s

set to ON / OFF

Press the Enter button

H o t s t a r t

i s a c t i v a t e d

When the Hot Start function is set to OFF, the following message appears:

H o t s t a r t

i s p r o h i b i t e d

Note: Unless the controller software allows discs to remain in the drives when powering up the system, a Hot Start is unavailable.

- 30 -