Pioneer DRM-7000 4.6Inserting Disc Magazines, 4.6.1Inserting Discs Using a 50-DiscMagazine

Daisy-chain six internal readers and a recorder then connect the Changer – requires a cable for four drives

DRM-7000Operating Instructions

Connect two readers and two recorders then connect the Changer – requires three separate SCSI controller cards

4.6Inserting Disc Magazines

Please review the insertion methods listed below.

•Insert discs into a standard 50-disc magazine then insert the magazine into the Changer.

•Insert discs into a standard 20-disc hyper-magazine then insert the magazine into the Changer.

•Use the control panel to specify which slot will receive a disc then select the specified disc number from the mail slot (refer to page 32 for mail slot details). Verify that the Changer is ready for operation and that there is an empty slot within a magazine.

•Issue a command from the host computer to accept a disc from the mail slot (refer to page 32 for mail slot details). Verify that the Changer is ready for operation and that there is an empty slot within a magazine. Also check that your Changer controller software supports this activity.

•Issue a command from the host computer to accept a hyper-magazine with discs. Verify that the Changer is ready for operation and that the bay is empty before inserting the magazine. Also check that your Changer controller software supports this activity.

Note: Hyper-magazines may not be removed from or added to the Changer while the unit is turned OFF.

4.6.1Inserting Discs Using a 50-Disc Magazine

Follow the directions below to insert discs in to a magazine then add the magazine to the Changer.

1.Turn the magazine’s release knob (vertical position) to unlock the slots.

-15 -