5.Remove the magazine by flipping the handle out and pulling the unit towards you. Support the magazine so that it remains level as it slides off of the rails.
4.6.2Inserting Discs Using a
Follow the directions below to insert discs in to a
1.Turn the magazine’s release knob (vertical position) to unlock the slots.
2.Insert discs horizontally with the labels facing up.
3.Turn the release knob to the horizontal position locking the discs into the slots.
Note: Turning the magazine
4.Insert the
*Once the magazine is inserted approximately half way into this bay,
the changer automatically pulls the unit forward until it is locked in place.
The Changer automatically reads the magazine ID and lists the information on the LCD display a few seconds after a successful magazine insertion.
M1 Locked – type
ID = * * * * * * * * * * * *
- 17 -
