Magazine – bay or
R ear (drive) – bay?
Press the Escape button
(Config)
Setup browser
Press the Escape button
(Inquiry) | I D = 5 |
| |
R e v i s i o n * . * * * |
| ||
Press the Escape button |
| ||
|
|
| |
|
|
|
|
|
|
| |
F r o n t - d o o r | :Close |
| |
R e a r - d o o r | :Open |
| |
Close the rear access panel
I n i t i a l i z i n g
Initialization complete
R o b o t i c s | ready |
D r i v e 1 | no disc |
For additional instructions from this point forward, refer to your Controller software documentation.
Note: Restart the host computer to recognize new and exchanged devices.
6.2Exchanging Drives
The procedure to exchange drives is similar to adding drives described in the previous section. However, use the drive exchange command to eliminate possible bay and ID assignment errors.
Note: It is best to duplicate the existing drive’s SCSI ID and termination switch settings to the new drive.
1.Enter the System Administrator.
2.Enter the Door submode to open the rear access panel. The following message appears on the LCD display:
F r o n t - d o o r | :Close |
R e a r - d o o r | :Open |
3.Return to the System Administrator mode.
-43 -
