Pioneer DRM-7000 operating instructions scsi ID = 2 TermOFF dev - ID =

DRM-7000Operating Instructions

scsi ID = 2 TermOFF dev – ID = 00150360

Press Enter then the Up arrow

Bay # 3 =	D r i v e 3
DVDROM	DVD-D7563
Press the Enter button
scsi ID = 3	TermOFF

dev – ID = 00000408

Press Enter then the Up arrow

Bay # 4 =	D r i v e 4
DVD-R	DVD-R7322
Press the Enter button
scsi ID = 4	TermON

dev – ID = 00126B0E

If a drive’s SCSI ID or Termination setting fail to match the displayed information, it is possible that a cable is cross-connected to the wrong port. Follow the steps below to reconnect the cables properly.

Disconnect the cables in the following order:

1 – SCSI Interface cable

2 – Changer Interface cable

3 – Power cable

Reverse the order to properly re-connect the drive beginning with the power cable.

If the Changer is unable to read the drive, the host computer fails to automatically configure the system.

8.Press the Escape button to return to User mode and to close the rear access panel.

scsi ID = 4	TermON
dev – ID = 00126B0E
Press the Escape button
Bay # 4 =	D r i v e 4
DVD-R	DVD-R7322

Press the Escape button

- 42 -