If there is a disc in the specified slot, the disc is carried to the mail slot. The mail slot tray opens and the following message appears on the LCD display.
R e p l a c e d i s c
& p r e s s E N T - k e y
If the specified slot is empty, the mail slot tray opens and the following message appears on the LCD display.
P l a c e a n e w d i s c & p r e s s E N T - k e y
Place a disc on the mail slot tray and press the Enter button. The following message appears on the LCD display:
T h e n e w d i s c i s
m o v i n g t o # * * *
When the slot holds the replacement disc, the LCD display changes to the initial Swap message showing the next swappable slot.
To exit the mode, press the Enter button again.
5.2.5.2 Remove
After selecting the Remove option, use the up and down arrow buttons to specify the slot number. Press the Enter button to select the slot.
D i s c N o . ? | # * * * |
M * * | - * * |
A slot must contain a disc in order to use this command. It the slot is empty or is unknown to hold a disc when the Enter button is pressed, the message on the LCD display remains unchanged.
The disc in the specified slot is carried to the mail slot. The mail slot tray opens and the following message appears on the LCD display.
R e m o v e t h e d i s c & p r e s s E N T - k e y
Remove the disc from the open tray and press the Enter button again to close the tray. After the disc is removed, the LCD display changes to the initial Remove message listing the next appropriate slot.
To exit the mode, press the Enter button again.
5.2.5.3Add
After selecting the Add option, use the up and down arrow buttons to specify the slot number. Press the Enter button to select the slot.
S l o t N o . ? | # * * * |
M * * | - * * |
- 35 -
