Connecting to a Power Source
CAUTION
●Before inserting any cables or AC adapter, check the directions and do not insert by force. It may cause breakage of cable or camera.
●If the charging LED of the AC Charger does not turn on or blink after inserting the rechargeable battery, please check whether the battery is inserted correctly.
●If you charge the battery with the camera power on, the battery can't charge fully. Turn the camera off while charging the battery.
■Charging LED of the AC Adapter
| Charging LED | |
Being Charged | Red LED is on | |
|
| |
Charging is complete | Green LED is on | |
|
| |
Charging error | Red LED is off or blinking | |
Being discharged | Orange coloured LED is on | |
(Using the AC adapter) | ||
| ||
|
|
●Turn the camera off while charging the battery.
●If you insert the fully discharged battery to charge it, do not turn on the camera at the same time. The camera may not be turned on because of the low battery capacity. Charge the battery for more than 10 minutes before using the camera.
●Do not use the flash frequently or take a movie clip with the fully discharged battery charged for a short time. Even if the charger is inserted, the camera power may be turned off because the rechargeable battery is discharged again.
●When you charge the battery with the cradle, you only can use Lithium Ion battery pack
《10》
■Insert the battery as shown
- If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+ /
- When the battery chamber cover is opened, do not press the battery chamber cover by force. This may
cause damage to the battery chamber cover.
■There are 4 indicators for battery condition that are displayed on the LCD monitor.
Battery |
|
|
|
|
|
|
|
|
|
| |
indicator |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ||
Battery | The battery is | Low battery capacity | Low battery capacity | Low battery capacity | |||||||
(Prepare to recharge | (Prepare to recharge | (Prepare to recharge | |||||||||
status | fully charged | ||||||||||
or use spare battery) | or use spare battery) | or use spare battery) | |||||||||
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
| |
Inserting the memory card
■Insert the memory card as shown.
- Turn off the camera’s power before
inserting the memory card.
- Have the front of the memory card facing toward the front of the camera (lens) and the card pins toward the back of the camera (LCD monitor).
-Do not insert the memory card the wrong way round. Doing so may damage the memory card slot.
