Getting started

1

2

Open the charger port cover. Connect the headset to the USB power adaptor via the USB cable. Plug the USB power adaptor into an electric socket.

Connecting the charger improperly may cause serious damage to the headset. Any damage caused by misuse is not covered by the warranty.

After fully charging, first unplug the USB cable from the headset, and then unplug it from the computer or the electric socket.

•To save energy, unplug the charger when not in use. The charger does not have a power switch, so you must unplug the charger from the electric socket when not in use to avoid wasting power. The charger should remain close to the electric socket and easily accessible while charging.

•The socket-outlet shall be installed near the equipment and shall be easily accessible.

Turning the headset on and off

• : ON

• : OFF

• : Bluetooth pairing mode

Follow all posted warnings and directions from authorised personnel in areas where the use of wireless devices is restricted, such as aeroplanes and hospitals.

English (UK)

8

6