Operation
Press the • or • button to select the
Antenna connection, then press the
ENTER Button.
•Air : "Air" antenna signal
Cable : "Cable" antenna signal
Air+Cable : "Air" and "Cable"
antenna signals
When selecting Cable TV system:
Press the ENTER button to start the auto
program. By default, the cable TV system is set to "STD".
If you want to select another type of
cable system, press the _1 button and use the • or • button to select
"STD', "HRC" or "IRC'. Press the ENTER button.
STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system that exists in your particular area.
At this point the signal source has been selected.
Press the • button to select "Start", then press the ENTER button to start the auto
program. The TV begins memorizing all available stations. Press the ENTER button
at any time to interrupt the memorization process.
Press the EXIT button to exit.
The TV must Be connected to an antenna in order to receive digital TV signals. Even if a particular channel is deleted from the memory, you can always tune to that channel directly by using the number buttons on the remote control.
NOTE
•All available DTV and Analog channels are automatically stored in memory.
English - 34
