Samsung HT-H5500K/SQ manual Symptom Check/Remedy Dolby Digital 5.1 CH, Correctly?, Changed

Appendix

	Symptom		Check/Remedy
Dolby Digital 5.1 CH		•	Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround
Surround Sound is not			Sound is produced only if the disc is recorded with 5.1 channel sound.
produced.		• Is the audio language correctly set to Dolby Digital 5.1-CH in the information
			display?
The remote control does		•	Are you operating the remote within its operational range and within the
not work.		•	properangle relative to the sensor?
			Are the batteries drained?
		•	Have you selected the mode (TV/BD) functions of the remote control (TV or BD)
			correctly?
•	The disc is rotating but	•	Is the TV power on?
•	there is no picture.	•	Are the video cables connected properly?
	Picture quality is poor	•	Is the disc dirty or damaged?
	and the picture is	•	A poorly manufactured disc may not be playable.
	shaking.
Audio language and		• The Audio Language and subtitle functions will not work if the disc does not
subtitles do not work.			contain multiple language sound tracks or subtitles.
The menu screen does		•	Are you using a disc that does not contain menus?
not appear even when you
select the menu function.
The aspect ratio cannot be		•	You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or 4:3
changed.			Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 mode only. Refer to
			the Blu-ray Disc jacket, and then select the appropriate function.
•	The product is not	•	Press and hold the remote control's 5 button for 5 seconds in STANDBY mode.
	working.		This will reset the unit.
	(Example: The power		- Using the RESET function will erase all stored settings.
	goes off or you hear a		Do not use this function unless necessary.
•	strange noise.)
	The Product is not
	working normally.
You have forgotten the		•	With no disc in the product, press and hold the product's 5 button for longer
rating level password.			than 5 seconds. INIT appears on the display and all settings will return to their
			default values.
			- Using the RESET function will erase all stored settings.
			Do not use this function unless necessary.
Can't receive radio		•	Is the antenna connected properly?
broadcasts.		•	If the antenna's input signal is weak, install an external FM antenna in an area with
			good reception.

There is no sound when you try to listen to TV audio through the home cinema speakers.

•If you press the ^ button while listening to TV audio using the D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and the TV audio is muted.

46 - English