Samsung HW-K651/ZF, HW-K651/EN manual Installing the Battery in the Remote Control, Descriptions

DESCRIPTIONS

++Controlling the Soundbar using Your TV Remote Control

1.Press and hold the SOUND button for more than 5 seconds while the Soundbar is turned on.

2.“ON - TV REMOTE” appears on the Soundbar’s display.

3.In the TV’s menu, set the TV speaker to external speaker.

●● Not available if the TV ARC function or HDMI mode is in use.
●● All buttons are not available except the VOL +/- and the	buttons in this function.

●● TV menus differ by manufacturer and model. Refer to the TV's user manual for further information. ●● Manufacturers supporting this function:

- VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCA

- This function may not be compatible with your TV's remote depending on the remote control's
manufacturer.	SOUND button for 5 seconds.
●● To turn off this function, press the

"OFF - TV REMOTE" appears on the Soundbar's display.

Installing the Battery in the Remote Control

1.Use a suitable coin to turn the remote control's battery cover counterclockwise to remove it as shown in the figure above.

2.Insert a 3V lithium battery. Keep the positive (+) pole facing up when inserting the battery. Put the battery cover on and align the '●' marks side by side as shown in the figure above.

3.Use a suitable coin to turn the remote control battery cover clockwise as far as it will go to fix it in place.

10