24 BUTTON KEYSET

PROGRAMMABLE KEYS LAYOUT

12 BUTTON KEYSET

PROGRAMMABLE KEYS LAYOUT

A B C D

E

F

A

B C D E

F

 

 

 

For the purposes of programming speed dial numbers, the programmable keys in the bottom row are known as A, B, C, D, E and F and are defined below.

•The A key is not used.

•The B key inserts a flash.

•The C key inserts a pause.

•The D key is used for pulse to tone conversion. If your system uses rotary (or pulse) dialing C.O. lines, pressing D while entering a speed dial num- ber causes all subsequent digits to be sent as DTMF tones.

•The E key is used to hide digits. Display keyset users may want to hide some speed dial numbers so that they will not show in the display. When you are entering a telephone number, press E. All subsequent digits will be hidden. Press E again to begin displaying digits.

•The F key is used to enter a name. See Personal Speed Dial Names under Display Features.

•Use the HOLD key to clear a speed dial number.

ONE TOUCH SPEED DIALING

You may assign any speed dial number to an already existing One Touch Speed Dial button for quick and easy dialing of frequently used numbers.

•While on-hook, press TRSF and then dial 107.

•Press a One Touch Speed Dial button.

•Dial the speed dial number (00–49or 500–999) that you want assigned to this button.

•Press TRSF to store your selection.

To call this telephone number, just press the One Touch Speed Dial button.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK or the MONITOR key if you are using a 7B phone before you begin dialing.

LAST NUMBER REDIAL

To redial the last telephone number you dialed, press the LNR key or dial 19.

NOTES:

1.If the Hot Keypad feature has been turned off, you must first lift the hand- set or press SPK or MONITOR before you begin dialing.

2.Redial does not apply to intercom calls.

MANUAL RETRY WITH LNR [L VERSION ONLY]

While you are on an outside call listening to a busy signal and you want to redial the same number dialed.

•Press the LNR key.

This will hang up your existing call and manually redial the same number di- aled. You can repeat this operation for a limited number of attempts.

SAVE NUMBER WITH REDIAL

To save the number you just dialed for later use, press the SNR key before hanging up.

To redial this saved number at any time, press the SNR key or dial 17. The same line will be selected for you.

NOTES:

1.If the Hot Keypad feature has been turned off, you must first lift the hand- set or press SPK or the MONITOR key if you are using a 7B phone before you begin dialing.

2.The saved telephone number is stored in memory until you save anoth- er.

3.Redial does not apply to intercom calls.

CHAIN DIALING

You may manually dial additional digits following a speed dial number or chain as many speed dial numbers together as required:

•After the first speed number is dialed, press SPD again and dial another speed number OR manually dial additional digits following a speed dial number.

26

27