HEADSET OPERATION

Keyset users can switch between headset mode and handset mode. When using headset mode, press the ANS/RLS or the MONITOR key if you are using a 7B phone to answer and release calls.

•With the handset on-hook, press TRSF and then dial 110.

•Dial 021 to use the headset or 020 to use the handset.

•Press TRSF to store your selection.

Your keyset may be equipped with a Headset mode key. If it is so equipped pressing this key while the light is out will cause the keyset to enter headset mode and the light will illuminate to indicate this. Pressing the key while the light is lit will cause the keyset to return to handset mode and the light will go out.

HOT KEYPAD

On the iDCS 500, your keyset’s keypad can be made “live” or “hot” so that it is not necessary to lift the handset or press SPK or the MONITOR key before you begin dialing. Calls can be made and features activated by simply dialing the C.O. line number, trunk group access code, intercom number or feature access code. To activate this feature:

•With the handset on-hook, press TRSF and then dial 110.

•Dial 031 to turn the Hot Keypad on or 030 to turn it off.

•Press TRSF to store your selection.

KEY CONFIRMATION TONE

You can hear a short beep (confirmation tone) each time you press a button on the dial pad. This tone can be turned on or off.

•While on-hook, press TRSF and then dial 110.

•Dial 040 to turn tones off or 041 to turn tones on.

•Press TRSF to store your selection.

REJOINING A PAGE

This feature allows you to hear the remaining portion of an ongoing internal page after you return your keyset to idle. To enable this feature:

•With the handset on-hook, press TRSF and then dial 110.

•Dial 051 to turn this feature on or 050 to turn it off.

•Press TRSF to store your selection.

42

RING PREFERENCE

This feature automatically answers ringing calls when you lift the handset or press the ANS/RLS or the MONITOR key if you are using a 7B phone. This method will always answer calls in the order they arrived at your keyset. When you turn ring preference off, you must press the flashing button to answer a call, allowing you to answer calls in the order you choose.

•With the handset on-hook, press TRSF and then dial 110.

•Dial 061 to turn ring preference on or 060 to turn it off.

•Press TRSF to store your selection.

DISPLAY SPEED DIAL NAME [L VERSION]

This option allows you to view the name associated with a speed dial number as it is dialed.

•With you handset on-hook, press TRANSFER and then dial 110.

•Press 111 to turn DISP SPDNAME on or 110 to turn it off.

•Press TRANSFER to store your selection.

CALLER ID REVIEW ALL [L VERSION ONLY]

This feature allows display keyset users to review Caller ID information for calls sent to their stations. This list can be from ten to fifty calls in a first in, first out basis. The list includes calls that you answered and calls that rang your station but that you did not answer. When reviewing this list, you can press one button to dial the person back. The system must be using LCR to dial the stored number.

•With you handset on-hook, press TRANSFER and then dial 110.

•Press 121 to turn CID REVIEW ALL on or 120 to turn it off.

•Press TRANSFER to store your selection.

SECURE OHVA [L VERSION ONLY]

This option allows you to receive OHVA calls via the speaker while you are on the handset.

•With you handset on-hook, press TRANSFER and then dial 110.

•Press 131 to turn AUTO CAMP-ONon or 130 to turn it off.

•Press TRANSFER to store your selection.

43