CUSTOMIZING YOUR KEYSET

AME BGM

This feature selects whether a station using Answer Machine Emulation will hear their personal greeting or BGM while callers are listening to the personal greeting. A BGM source must be selected for this to work. This feature only applies if there is a CADENCE card installed in the system and your key- set has a programmed AME key.

•While the handset is on-hook, press TRSF and then dial 110.

•Press 091 to turn on AME BGM or 090 to turn it off.

•Press TRSF to store your selection.

AME PASSWORD

This feature allows people using the AME feature to enable password pro- tection. This will prevent unauthorized people from listening to your messages being left. The passcode is the same as your station passcode. This feature only applies if there is a CADENCE card installed in the system and your keyset has a programmed AME key.

•With the handset on-hook, press TRSF and then dial 110.

•Dial 101 to turn on AME PASSWORD or 100 to turn it off.

•Press TRSF to store your selection.

AUTO CAMP-ON[L VERSION ONLY]

This option allows intercom calls to be automatically camped on, if possible, when a busy station is called.

•With the handset on-hook, press TRSF and then dial 110.

•Press 081 to turn CAMP-ON on or 080 to turn it off.

•Press TRSF to store your selection.

SELECT RING TONE

Each keyset user can select any one of eight ring frequencies:

•While on-hook, press TRSF and then dial 111.

•Dial 1–8or press the UP and DOWN keys to hear each tone.

•When you hear the tone that you prefer, press TRSF to save it.

NOTE: Specific lines or stations may be programmed to ring with a different tone than what you have selected for you keyset.

40

CHANGE YOUR PASSCODE

From the factory, your station passcode is 1234. You can change your station passcode whenever you desire.

•While on-hook, press TRSF and then dial 101.

•Dial your old passcode.

•Dial a new passcode (must be four characters). You can use 0–9.

•Redial the new passcode to verify. If successful, you will hear two beeps. Four beeps indicate an incorrect code. Reenter the code again.

•Press TRSF to store the new passcode.

SET ANSWER MODE

You can receive internal calls in one of three modes (see Answering Intercom Calls under Intercom Calls for descriptions):

•While on-hook, press TRSF and then dial 103.

•Dial 0 for Ringing, 1 for Auto Answer or 2 for Voice Announce.

•Press TRSF to store your selection.

NOTE: When your keyset is programmed for Auto Answer and you have Forward No Answer (FNA) turned on, you must answer screened transfers by pressing ANS/RLS or the MONITOR key if you are using a 7B phone before your FNA timer expires or the call will forward.

AUTOMATIC HOLD

While on an outside call, pressing a line key, route key or a flashing CALL button will automatically put your call on hold and connect you to the next call. This feature can be turned on or off at your keyset.

•With the handset on-hook, press TRSF and then dial 110.

•Dial 001 to turn Automatic Hold on or 000 to turn it off.

•Press TRSF to store your selection.

NOTE: Intercom calls can only be automatically put on hold by pressing TRSF.

41