AUTO ANSWER MODE (INTERCOM CALLS ONLY)

When another station calls you, your keyset will sound a brief attention tone and then automatically answer the call.

•Your microphone and speaker are turned on and you can speak hands- free. For privacy, use the handset. If you are using a 7B phone you must pick up the handset to speak to the calling party.

•To finish the call, replace the handset or press the ANS/RLS or the MON- ITOR key if you are using a 7B phone.

BUSY STATION CALLBACK

When you call another station and receive a busy signal:

•Press the CBK key or dial 44.

•When the busy station becomes free, your keyset will ring.

•Lift the handset or press ANS/RLS to call the now idle station.

NOTES:

1.A callback will be canceled if not answered within 30 seconds. If you have set a callback, your CBK key will light.

2.If the Hot Keypad feature has been turned off, you must first lift the hand- set or press SPK before dialing.

BUSY STATION CAMP-ON

When you call another station and receive a busy signal but you do not want to wait for a callback:

MANUAL CAMP-ON

•Press the CAMP key or dial 45.

•The called station will receive off-hook ring tone repeated every few sec- onds and its first available CALL button will flash green to indicate your call is waiting.

•Wait for the called party to answer.

•The called station must release its first call or place it on hold before an- swering your camp-on.

NOTES:

1.If you receive No More Calls tone, that station has no available key to ac- cept your call. Hang up or leave a message.

14

2.If the Hot Keypad feature has been turned off, you must first lift the hand- set or press SPK before you begin dialing.

AUTO CAMP-ON [L VERSION ONLY]

When you want to automatically camp on to a busy station without pressing the camp on button every time you call a busy station, you can set your phone for auto camp-on.

•With the handset on-hook, press TRSF and then dial 110.

•Dial 081 to turn on auto camp-on or 080 to turn it off.

•Press TRSF to store your selection.

CALLING YOUR SYSTEM OPERATOR

•Dial 0 to call your system operator or group of operators.

•If you want to call a specific operator, dial that person’s extension num- ber.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK before you begin dialing.

15