CANCELLING CALLBACK

A callback will be canceled if not answered within 30 seconds. If you have set a callback, your CBK key will light.

Your phone may have a maximum of five callbacks to lines and/or stations set at a time. To cancel a callback:

Press the CBK key or dial 44. You will hear confirmation tone.

While you are listening to confirmation tone, press the HOLD key. This will cancel the oldest set callback.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK or the MONITOR key if you are using the 7B phone before dialing.

INTERCOM CALLS

CALLING OTHER STATIONS

Dial the extension number or group number.

Wait for the party to answer. If you hear a brief tone burst instead of ring- back tone, the station you called is set for Voice Announce or Auto Answer. Begin speaking immediately after the tone.

Finish the call by replacing the handset or pressing the ANS/RLS or the MONITOR key if you are using a 7B phone.

NOTES:

1.If you have a DSS key assigned to an extension or station group, you may press this key instead of dialing the number. If you are using a 7 Button Set you must pick up the handset to speak to the calling party.

2.If the Hot Keypad feature has been turned off, you must first lift the hand- set or press SPK or the MONITOR key if you are using a 7B phone before you begin dialing.

ANSWERING INTERCOM CALLS

When your keyset rings, simply lift the handset—OR—press the ANS/RLS key to be connected to the calling station. If you are using a 7B phone you must pick up the handset to speak to the calling party.

Finish the call by replacing the handset or pressing the ANS/RLS or the MONITOR key if you are using a 7B phone.

See Ring Preference under Customizing Your Keyset.

VOICE ANNOUNCE MODE (INTERCOM CALLS ONLY)

When another station calls you, your keyset will sound a brief attention tone and you will hear the caller’s announcement.

Press ANS/RLS to turn on the microphone and speak handsfree—OR—lift the handset to reply.

To finish the call, replace the handset or press the ANS/RLS key.

12

13