MEET ME PAGE

•Lift the handset.

•Press the Meet Me Page (MMPG) key or dial 54.

•Dial the desired zone number.

•After the attention tone, instruct the paged person to dial 56.

•Press WAIT or TRSF.

•Remain off-hook until the person dials 56 from any phone.

•The paged person will be automatically connected with you.

CALL PARK AND PAGE

When you have an outside call for someone who is not at his/her desk, you can park the call prior to paging. The iDCS 500 offers two different methods:

MANUAL PARK ORBITS

•While in conversation, press the PARK button.

•Enter a desired orbit number (0-9), if the orbit number is busy dial anoth- er orbit number. Display users can press ✱ to automatically place the call in any available orbit number and see the number in the display.

•Remember the selected orbit number.

•Replace the handset when finished.

•Lift the handset and make a page announcement as previuosly described (example: “John Smith park two”).

To retrieve a parked call from orbit:

•Press the PARK button and dial the announced orbit number (0-9).

•You will be connected to the parked call.

NOTES:

1.You must have a PARK button or park access code to retrieve and place calls in park orbits.

2.If the call is not retrieved within a pre-programmed period of time, it will recall your keyset and have a slow amber light. You cannot park and page intercom calls.

3.If the Hot Keypad feature has been turned off, you must first lift the hand- set or press SPK before you begin dialing.

AUTOMATIC PARK WITH PAGE KEY

•While in conversation, press the PAGE button. The call is automatically parked at your station.

•Receive page tone and dial a desired page zone number.

•Make announcement indicating your extension number or the line num- ber. Hang up.

30

To retrieve an automatically parked call:

•Dial 10 plus the number that was announced. If you have a PAGPK key, press it and dial the number that was announced. If you have a PARK key, press it and dial the announced orbit number.

•You will be connected to the parked call.

NOTES:

1.If the call is not retrieved within a pre-programmed period of time, it will recall your keyset and have a slow amber light. You cannot park and page intercom calls.

2.If the Hot Keypad feature has been turned off, you must first lift the hand- set or press SPK before you begin dialing.

SETTING A MESSAGE INDICATION

When you are calling another station and no one answers or you receive a busy signal, you can leave a message indication:

•Press the MSG key or dial 43 and receive confirmation tone.

•Hang up. The MSG key on the called station will light. Standard tele- phones receive special dial tone as a message indication or a lit message lamp, if the phone is equipped with one and they are connected to a 16MWSLI card on the system.

NOTES:

1.A station can have up to five message indications.

2.If the Hot Keypad feature has been turned off, you must first lift the hand- set or press SPK before you begin dialing.

CANCELING MESSAGES

To cancel a message indication that you left at another station, dial 42 plus the extension number of the station at which you left a message.

To cancel all message indications left at your keyset, dial 42 plus your exten- sion. Your MSG light will go out.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK before you begin dialing.

31