Chapter 07

Broadcasting

Configure the Broadcasting settings for the product. Displayed menus may vary depending on the region.

Auto Tuning

MENU m Broadcasting Auto Tuning ENTER E

Broadcasting

Auto Tuning

Channel List

Guide

Schedule Manager

Edit Channel

Edit Favourites

Channel Settings

-- The displayed image may differ depending on the model.

-- Available in TV mode only.

The Auto Tuning function memorise all channels that are available over the aerial or through your cable system and adds them to the Channel List.

Auto Tuning

To start Auto Tuning, follow these steps:

1

Push MENU m Broadcasting Auto Tuning ENTER E on your remote. The Auto Tuning screen appears.

2

On the Auto Tuning screen, select the source of your product signal.

 

――Air: If your product is connected to an antenna choose Air, and then press ENTER E. The product will automatically

 

start memorizing channels.

 

――Cable: If your product is connected to a cable outlet, choose Cable, and then press ENTER E. Go to Step 3.

 

――Select Digital & Analogue, Digital or Analogue to scan for channels.

3

Sets Search Mode using / buttons. When done, select Scan, and then press ENTER E. The product will start

 

memorizing channels.

――Channel memorization can take up to 45 minutes, depending on your cable system.

――Memorise channels are added to the Added Ch. list. These are the channels you will see when you use the channel buttons on your remote.

65

Page 65
Image 65
Samsung LH40EBDWLGW/XV, LH48EBDWLGW/XV manual Menu m → Broadcasting → Auto Tuning → Enter E