Samsung LN32A620A1F, LN2A620A1F Hotel function Viewing the Clone Remote Control, Setting Mode

Hotel function

Viewing the Clone Remote Control

➣This function is only available when the TV is installed in a hotel.

➣The Clone Remote Control is only for use in Hotel installations and is not included with the Accessories.

A Remote control which instantly sets up TV settings to predefined values.

Setting Mode

 Picture mode

 Picture size

 Channel name

 Tune Frequency

 Hotel service mode: Interactive Hotel TV Hotel mode: Retail TV

Buttons, Indicators and Connections

1 Press “Power” button Television Power is On

2 Press “Hotel TV” button

Interactive TV: Enter Interactive Hotel TV Option

Hotel Mode TV: Enter Hotel Mode Option

3 Press “TV” button to enter TV MENU.

4 Control the cursor in the menu

5 Receiving the data from TV or PC.

6 Press Clock Setting

- Enter clock set up menu

- Change clock data with Up/Down/Left/Right buttons

7 Communication Status Indicators

- TX: Indicates that the Clone Remote Control is sending data to the TV. (If the Send button is pressed, the TX Indicator will blink.)

- RX: Indicates that the TV is sending data to the Clone Remote Control. (If the Receive button is pressed, the RX Indicator will blink.)

8 Battery Indicator notifies remaining battery charge - Red: Battery Low

-Green : Battery Middle

-Blue: Battery Full

➣The battery needs to be charged when the indicator blinks red. 9 Return

0 Send

!Press Lock/Unlock

-Front(side) panel buttons and IR receiving(except lock/unlock button) is non-available or available.

@Connect TV with Clone remote control via RS-232C Cable

# Remote IR out $ Charger connector

English - 119