Samsung LN2A620A1F, LN32A620A1F, LN40A620A1F user manual Connecting a VCR, Video Connection

Connecting a VCR

Video Connection

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 9~10). Skip step 1 if you have not yet connected to an antenna or a cable system.

1. Connect a Video Cable

between the VIDEO

OUT jack on the

VCR and the AV IN 1

[Y/VIDEO] or AV IN 2

[VIDEO] jack on the TV.

2. Connect Audio Cables

between the AUDIO

OUT jacks on the VCR

and the AV IN 1 (or AV

IN 2) [R-AUDIO-L] jacks

on the TV.

➣ If you have a “mono”

(non-stereo) VCR,

use a Y-connector

(not supplied) to

connect to the right

and left audio input

TV Rear Panel

VCR Rear Panel

2 Audio Cable (Not supplied)

1 Video Cable (Not supplied)

TV Side Panel

jacks of the TV.

Alternatively, connect

the cable to the “R”

jack. If your VCR

is stereo, you must

connect two cables.

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

➣Each VCR has a different back panel configuration.

➣When connecting a VCR, match the color of the connection terminal to the cable.

➣When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

S-Video Connection

Your Samsung TV can be connected to an S-Video jack on a VCR. (This connection delivers a better picture as compared to a standard VCR.)

1.Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the

AV IN 2 [S-VIDEO] jack on the TV.

2.Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 2 [R-AUDIO-L] jacks on the TV.

TV Side Panel

VCR Rear Panel

1 S-Video Cable (Not supplied)

2 Audio Cable (Not supplied)

An S-Video cable may be included with a VCR. (If not, check your local electronics store.)

➣Each VCR has a different back panel configuration.

➣When connecting a VCR, match the color of the connection terminal to the cable.

English - 13