Samsung LN32A620A1F Problems.’ message appears, Devices, Device cannot follow the command

Problem	Possible Solution
‘The connected device is unavailable	This message appears when the selected function is not supported by the
to perform this function for temporary	relevant device or the relevant device cannot execute the selected function.
problems.’ message appears.	Most STBs, DTVs and camcorders do not support the power on/off command.
	This message may appear when you issue the power command for these
	devices.
	This message also appears when the command is supported but the relevant
	device cannot follow the command.
	Retry after checking the current mode of the relevant device.
‘Not available format is selected.’	This message appears when the selected device does not support the MPEG
message appears.	format.
	At present, D-Net supports MPEG TS only.
‘The Disc is Empty.’ message appears.	This message appears when trying to record the contents of AV-HDD using
	another device when there is no content saved on the AV-HDD. Before make a
	recording from an AV-HDD to another device, first check if there is any saved
	content on the AV-HDD.
This device is unavailable for D-Net.	This message appears if you have connected a 1394 device or equipment
	other than a supported device (D-VHS, DTV, STB, AV-HDD, Camcorder),
	or if the connected device does not support the AVC defined in the 1394
	specifications, even if the device is a supported device, when you have
	selected the device to use it.
Connection failed. Check if the 1394	This message appears if there is a connection problem when trying to use a
cable is connected.	D-Net device.
Initializing…	This message appears if the AV-HDD is booting when trying to use the AV-
	HDD.
Connection failed. The device is not	This message appears if there is a connection problem when trying to use a
responding.	D-Net device. This message appears when the response of the component
	device malfunctions or is incorrect.
No space left on disc.	This message appears if the AV-HDD has no space to record.
The D-NET ERROR message appears	Although you have connected external devices according to the procedures
on the screen.	described in the manual to use the D-Net function, the D-NET ERROR
	message may appear on the screen. In this case, check to see if the jacks are
	damaged.

English - 83