Samsung LN40A620A1F, LN2A620A1F, LN32A620A1F user manual ANT 1 in Cable

Using the OCAP (OpenCable Application Platform) Data Service

Connecting CableCARD

OCAP is an operating system provided by your Cable company that provides interactive services such as Electronic Program Guides, Digital Video Recording, Gaming etc. to enhance your TV viewing experience. You must obtain a CableCARD from a local cable service provider.

For more information, visit the website : www.cablelabs.com

1. Insert the CableCARD into the “CableCARD™” slot and the message “CableCARD™ Inserted” is displayed.

2.Plug the incoming cable into the ANT 1 IN (CABLE) terminal on the back of the TV.

➣ The CableCARD recognizes input signals from ANT 1 IN (CABLE).

ANT 1 IN (CABLE)

3.Within a few minutes after step 2, a message will appear with a phone number to call to activate the CableCARD. This message contains the CableCARD ID and Host ID numbers of your TV, which records these numbers in preparation for activation.

4.After activation, the cable provider will send activation messages to the CableCARD. During this operation, the message “Updating Channel List” is displayed. When the “Updating Channel List” process is completed, the message “Updating Completed” is displayed and your TV will switch to an active channel.

In order to start service for this device, please contact customer sevice at

PH# 888 123-XXXX

CableCARD(tm): 0-123-456-789-XXX

Host ID:0-123-456-XXX

Scrambled Channel or

weak signal

Updating Channel List

English - 69