Memorizing the Channels, Auto Program Air Stop

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available channels are memorized, use the CH< or CH> button to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding or deleting channels (Channel Manager).

Selecting the Video Signal-source	TV

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

Channel

Air / Cable	: Air	►
Auto Program		►
Channel Manager		►
Fine Tune	: Auto	►
Color System	: Auto	►

Move Enter Return

2.Press the ENTER button. Repeatedly press the ▲ or ▼ button to cycle through these choices: "Air", "STD", "HRC", or "IRC" (all cable TV).

Press the ENTER button.

STD, HRC and IRC identify various types of cable TV systems.

Contact your local cable company to identify the type of cable system that exists in your particular area.

At this point, the signal source has been selected.

Storing Channels in Memory (Automatic Method)

1.First, select the correct signal source (Air, STD, HRC, or IRC).

2.Press the ▲ or ▼ button to select "Auto Program", then press the ENTER button.

3.Press the ENTER button to select "Start".

The TV will begin memorizing all of the available channels.

The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes. Press the ENTER button at any time to interrupt the memorization process and return to the "Channel" menu.

4.After all the available channels are stored, the "Channel" menu reappears. Press the EXIT button to exit.

To stop the search before it has finished, press the ENTER button with "Stop" selected.

TV	Channel
Air / Cable	:		AIR
Auto Program			STD
Channel Manager			HRC
Fine Tune	:		IRC
Color System	:
Move		Enter		Return
TV	Channel
Air / Cable	: Air			►
Auto Program				►
Channel Manager				►
Fine Tune	: Auto			►
Color System	: Auto			►