Samsung LN32A450C1 user manual Resetting the Picture Settings to the Factory Defaults

Setting the Blue Only Mode

This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Color and Tint of video equipment such as DVD players, Home Theaters, etc.

Using this function, you can adjust the Color and Tint to preferred values appropriate to the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow Color Bar Patterns, without using an additional Blue Filter.

1.Follow the “Activating Picture Options” instructions numbers 1 and 2. (Refer to page 28).

2.Press the ▲ or ▼ button to select "Blue Only Mode", then press the ENTER button.

3.Press the ▲ or ▼ button to select "Off" or "On", then press the ENTER button. Press the EXIT button to exit.

“Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.

TV

TV

Picture Options

Color Tone	: Normal	►
Size	: 16:9	►
Digital NR	: Auto	►
DNle	: Off	►
HDMI Black Level	: Normal	►
Blue Only Mode	: Off	►

Move Enter Return

Picture Options

Color Tone	: Normal
Size	: 16:9
Digital NR	: Auto
DNle	: Off
HDMI Black Level	: Normal
Blue Only Mode	:	Off
		On

Move Enter Return

Resetting the Picture Settings to the Factory Defaults
1. Press the MENU button to display the menu.				TV	Picture	7
	Press the ENTER button, to select “Picture”.			Backlight
				Mode	: Standard
2.	Press the ▲ or ▼ button to select "Reset", then press the ENTER	button.		Contrast		95
				Sharpness		40
	Press the ▲ or ▼ button to select “OK” or “Cancel” then press the ENTER		button.	Brightness	G 50	45
				Tint		R 50
				Color		50
	Press the EXIT button to exit.			Detailed Settings		OK
				Reset	:
				Picture Options
	Each mode can be reset.				Cancel
				Move	Enter	Return

English - 31