
Troubleshooting for Anynet+
Symptom | Solution |
Anynet+ does not work. | ■ Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ |
| devices only. |
| ■ Connect only one receiver (home theater). |
| ■ Check if the Anynet+ device power cord is properly connected. |
| ■ Check the Anynet+ device’s Video/Audio/HDMI cable connections. |
| ■ Check whether Anynet+ |
| ■ Check whether the TV remote control is in TV mode. |
| ■ Check whether it is Anynet+ exclusive remote control. |
| ■ Anynet+ doesn’t work at a certain condition. (Searching channels, Plug & Play, etc.) |
| ■ When connecting or removing the HDMI cable, please make sure to search devices |
| again or restart your TV. |
| ■ Check if the Anynet+ Function of Anynet+ device is set on. |
I want to start Anynet+. | ■ Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ |
| |
| ■ Press the TV button on the TV remote control to switch to TV. Then press the TOOLS |
| button to show the Anynet+ menu and select a menu you want. |
I want to exit Anynet+. | ■ Select View TV in Anynet+ menu. |
| ■ Press the SOURCE button on the TV remote control and select a device other than |
| Anynet+ devices. |
| ■ Press any of CH</>, CH LIST, |
| (Note that the channel button operates only when a |
| is not connected.) |
The message “Connecting to | ■ You cannot use the remote control when you are configuring Anynet+ or switching to a |
Anynet+ device...” appears on the | view mode. |
screen. | ■ Use the remote control when the Anynet+ setting or switching to view mode is |
| complete. |
The Anynet+ device does not play. | You cannot use the play function when Plug & Play is in progress. |
The connected device is not | ■ Check whether or not the device supports Anynet+ functions. |
displayed. | ■ Check whether or not the HDMI cable is properly connected. |
| ■ Check whether Anynet+ |
| ■ Search Anynet+ devices again. |
| ■ You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables |
| may not support Anynet+ functions. |
| ■ If it is terminated by an abnormal situation such as disconnecting the HDMI cable or |
| power cord or a power failure, please repeat the device scan. |
The TV program cannot be | Check whether the antenna jack on the recording device is properly connected. |
recorded. |
|
English - 54