“Side by Side” and “Top & Bottom” are available when the resolution is 720p, 1080i and 1080p in DTV, HDMI and USB mode or when set to PC and the PC is connected through an HDMI/DVI cable.

“Vertical Strip”, “Line by Line” and “Checker Board” are available when the resolution is set to PC and the PC is connected through an HDMI/ DVI cable.

“Frequency” displays the frequency (60Hz only) when the resolution is set to PC.

■ 3D 2D (Off / On): Displays the image for the left eye only.

This function is deactivated when 3D Mode is set to “2D 3D” or Off.

■ 3D View point: The overall adjustment of 3D perspective.

This function is deactivated when 3D Mode is set to “2D 3D” or Off.

■ Depth: Adjusts focus / depth in “2D 3D” mode.

This function is only activated when the 3D Mode is “2D 3D”.

■ Picture Correction: Adjusts the images for the left and right eye.

■ 3D Auto View (Off / On): If 3D Auto View is set to On,

a “Side-By-Side” format HDMI signal with one of the resolutions below is automatically switched to 3D. Here, correct 3D information must be sent from the Standard HDMI 3D Format.

If a 3D failure occurs due to a 3D information error, set 3D Auto View to Off and manually select a 3D Mode using the 3D( ) button or corresponding menu.

Support resolution (16:9 only)

Resolution

Frequency (Hz)

1280 x 720p

60 Hz

1920 x 1080i

60

Hz

1920 x 1080p

24

/ 30 / 60 Hz

■ 3D Optimize: The overall adjustment of 3D effect.

Resolution supported for HDMI PC mode

The resolution for HDMI PC mode is optimized to 1920 x 1080 input.

An input resolution other than 1920 x 1080 may not be displayed properly in 3D display or full screen mode.

How to watch the 3D image

3D

To watch in 3D, wear 3D glasses and press the power button on the glasses.

Watching 3D picture for a long time may cause eye fatigue and/or dizziness.

OK Cancel

UMove EEnter eExit

3D

Usiing tthe LEFT // RIIGHT keys on tthe rremote control, sellectt tthe iicon suitable fforr tthe piictture on scrreen..

UMove EEnterr eExit

1.Press the CONTENT button, then the Content View menu will appear.

2.Press the or button, then select 3D.

To watch in 3D, wear 3D Active Glasses and press the power button on the glasses.

3.Select OK, then press the ENTERE button.

4.Using the or buttons on your remote control, selects the 3D Mode of the image you want to view. Some 3D modes may not be available depending

on the format of the image source.

Supported formats and operating specifications for Standard HDMI 3D

The 3D formats indicated below are recommended by the HDMI association and must be supported.

Source signal format

Standard HDMI 1.4 3D

1920x1080p@24Hz x 2

1920x2205p@24Hz

1280x720p@60Hz x 2

1280x1470p@60Hz

03 Basic Features

English 19

Page 19
Image 19
Samsung LN46C750 user manual How to watch the 3D image, OK Cancel