English-10
4
Connect a coaxial
cable between the
ANTOUT terminal
on the cable box
and the B–IN
terminal on the
A/B switch.
5
Connect another
cable between the
other OUT terminal
on the splitter and
the A–IN terminal on
the RF (A/B) switch.
6
Connect the last
coaxial cable
between the OUT
terminal on the RF
(A/B) switch and the
VHF/UHF terminal
on the rear of the TV.
INSTALLATION
After you’ve made this connection, set the A/B switch to the “A” position for normalviewing. Set the A/B switch to the “B” position to view scrambled channels.(When you set the A/B switch to “B,” you will need to tune your TV to the cable box’soutput channel, which is usually channel 3 or 4.)
BN68-00653A-01Eng.qxd 5/7/04 9:03 AM Page 10