OP E R AT I O N
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the “Blue screen” mode to “Off”.
1
Press the MENU button to display the menu.
Press the UP/DOWN 
buttons to select “Setup”, then press the ENTER 
button.
2
Press the UP/DOWN 
buttons to select “Blue Screen”, then press the ENTER 
button.
3
Press the UP/DOWN 
buttons to set Blue Screen “On” or “Off”.
Press the EXIT button to exit.
Pressing the UP/DOWN 
buttons will alternate between “On” and “Off”.
