English-78
TROUBLESHOOTING
Problem Possible Solution
Can’t use Anynet. To change the remote control to Anynet mode,be sure to press
the “Mode”button on the TV remote control to change to TV
mode first.
I would like to turn the
Anynet device off. Press the [Power] button on the TVremote control while
usingthe Anynet Watch function and the Anynet device that
was automatically turned on by the Anynet System is turned
off. (However, you cannot turn the device off in this manner if
it was turned on manually.)
Press the Input button while using the Anynet Watch function
and all Anynet devices except for the TV are turned off.
Select a different Watch menu item while using the Anynet
Watch function and the Anynet device you have been watching
is turned off.
Can’t use (name of device). Check to see if the power code of the device is plugged in
properly.
Check to see if the Anynet devices are connected properly
according to the instructions.
Can’t use in the current mode. The key is not supported in the current mode.
Anynet operating… You cannot use the keys on the remote control while the Anynet
settings are being adjusted or during a Watch TV or Watch STB.
Try the keys again after the application of the new Anynet
settings or the mode switch is complete.
The device that is currently recording is not turned off when
you press the power button.
To turn a device that is currently recording off, use the remote
control of such device or the button on the front of the device.
You cannot turn the device
that is currently recording off.
BN68-00653A-01Eng.qxd 5/7/04 9:06 AM Page 78