Samsung SLM2825DW, M282x Printing a network configuration report, Using a network cable, Quit

Wireless network setup

13	When the window that tells you that the network cable connection is
	confirmed appears, disconnect the network cable and click Next..
	If the network cable is connected, it may have trouble finding the
	machine when configuring the wireless network.
14	The wireless network connects according to the network configuration.
15	Wireless network set up is completed. After installation is finished, click
	Quit.

After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installation for Mac" on page 96).

Using a network cable

• After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installing driver over the network" on page 107).

•See your network administrator, or the person that set up your wireless network, for information about your network configuration.

Items to prepare

•Access point

•Network-connected computer

•Software CD that was provided with your machine

•A machine installed with a wireless network interface

•Network cable

Machines that do not support the network port will not be able to use this feature (see "Rear view" on page 16).

Your machine is a network compatible machine. To enable your machine to work with your network, you will need to perform some configuration procedures.

Printing a network configuration report

You can identify the network settings of your machine by printing a network configuration report.

See "Printing a network configuration report" on page 102.

2. Using a network-connected machine 139